MIL-R-83407C
2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
NATIONAL CONFERENCE OF STANDARDS LABORATORIES
NCSL-Z540.1 - Calibration Laboratories and Measuring and Test Equipment - General
Requirements.
(Application for copies should be addressed to Institute of Electrical and Electronic Engineers at https://www.ncsli.org or, P. O. Box 1331, 445 Hoes Lane, Piscataway, NJ 08854-1331).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM G 21 - Standard Practice for Determining Resistance of Synthetic Polymeric Materials to
Fungi.
(Application for copies should be addressed to ASTM International at https://www.astm.org or, PO Box C700, 100
Barr Harbor Drive, West Conshohocken, PA 19428-2959.) INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)
ISO 10012-1 - Quality Assurance Requirements for Measuring Equipment - Part 1: Metrological
Confirmation System for Measuring Equipment.
(Application for copies should be addressed to American National Standards Institute (ANSI) at https://www.iso.org or, 11 West 42nd Street, New York, NY 10036.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein (except for related specification sheets), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the applicable specification sheet. In the event of any conflict between the requirements of this specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample of parts shall be subjected to first article inspection (see 6.3)
in accordance with 4.3.
3.3 Materials. Materials shall be as specified herein. However, when a definite material is not specified, a material shall be used which will enable the relay to meet the performance requirements of this specification. Materials used shall be self-extinguishing and shall not support combustion, give off noxious gases in harmful quantities, give off gases in quantities sufficient to cause explosion of sealed enclosures, cause contamination of the contacts or other parts of the relay, or form current carrying tracks when subjected to any of the tests specified herein. Unless otherwise specified (see 3.1), the selection of material shall be such as to provide a shelf life of at least 2 years
without adversely affecting the operation of the relay. Acceptance or approval of any constituent material shall not be
construed as a guaranty of the acceptance of the finished product.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business