MIL-R-5757/13H
REQUIREMENTS: Contact data:
Configuration: DPDT Arrangement: 2 form C
Load ratings: 1/
High level (relay case grounded): Resistive: 2 amperes at 28 V dc.
0.3 ampere at 115 V ac, 60 to 400 Hz. 2/
Inductive: 0.75 ampere at 28 V dc, at an inductive load of 200 millihenries, minimum. Lamp: 0.1 ampere at 28 V dc.
Low level: 10 to 50 ยตA at 10 to 50 mV dc or peak ac. Intermediate current: Applicable.
Contact resistance or voltage drop: Rated life:
Before: 0.05 ohm.
During: 10 percent of open circuit voltage maximum. After: 0.1 ohm.
Intermediate current: Before: 0.05 ohm. During: 3 ohms. After: 3 ohms.
Low level:
Before: 0.05 ohm. During: 100 ohms. After: 0.15 ohm.
1/ Each relay possesses high and low level capabilities. However, relays previously tested or used above 10 mA resistive at 6 V dc maximum, or peak ac open circuit, are not recommended for subsequent use in low level applications.
2/ For qualifications, testing of 400 hertz (Hz) loads are not required.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business