MIL-PRF-28750/9F
Shock (specified pulse): MIL-STD-202, method 213, test condition F (1,500 g's).
Vibration: 20 g's, 10 Hz to 2,000 Hz.
Moisture resistance: Not applicable.
Electromagnetic interference: Maximum broadband conducted emission on power lines with 115 V
ac, 400 Hz, 1.0 ampere resistive load during steady state and switching conditions (see figure 5).
Resistance to soldering heat: Applicable.
Salt atmosphere (corrosion): In accordance with MIL-STD-750, method 1041.
PHYSICAL REQUIREMENTS:
Weight: 6 grams maximum.
Dimensions and configuration: See figure 1.
Terminal strength: 1 pound pull minimum.
Terminal solderability: Applicable.
Terminal finish: Corrosion resistant material. Corrosion resistant material such as gold plating are
considered acceptable.
Seal: Hermetic (solder or weld).
Minimum marking: Part number, functional diagram and terminal identification, date code, and
manufacturer's name or source code.
Referenced documents. In addition to MIL-PRF-28750, this document references the following:
Changes from previous issue: The margins of this specification are mark with vertical lines to indicate
where changes from the previous issue were made. This was done as a convenience only and the
Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and on
contractors are cautioned to evaluate the requirements of this document based on the entire content
irrespective of the marginal notations and relationship to the last previous issue.
Custodian:
Preparing activity:
Navy - EC
DLA - CC
Air Force - 85
DLA CC
(Project 5945-2013-004)
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above
using the ASSIST Online database at https://assist.dla.mil.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business