MIL-DTL-26126/2B
Inches
mm
Inches
mm
39.6
.203
5.16
1.56
57.38
.234
5.94
2.259
59.7
.312
2.35
7.92
63.50
.343
2.500
8.71
76.2
.375
3.00
9.52
.38
9.7
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only and are based upon 1.00 inch = 25.4 mm.
3. Unless otherwise specified, tolerances are ±.010 (0.25 mm) for three place decimals and ±.03 (0.8
mm) for two place decimals.
4. Terminal letters need not appear on the relay header provided there is affixed to the relay a suitable
legible circuit diagram that identifies each terminal location specified.
FIGURE 1. Relay, voltage, dc system, sealed Continued.
REQUIREMENTS:
Contact requirements:
Configuration: See figure 1.
Load ratings (relay case grounded):
Inductive: 1.2 amperes inductive at 33 volts.
Inductive overload: 5.5 amperes inductive at 150 Vdc.
2