MS25465F
Inches .000 |
mm 0.00 |
.001 |
0.03 |
.005 |
0.13 |
.040 |
1.02 |
.062 |
1.57 |
.152 |
3.86 |
.172 |
4.37 |
.250 |
6.35 |
.375 |
9.53 |
.500 |
12.70 |
.687 |
17.45 |
.843 |
21.41 |
1.187 |
30.15 |
1.531 |
38.89 |
1.750 |
44.45 |
NOTES:
1/ Dimensions are in inches.
2/ Metric equivalents are given for general information only.
3/ Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4/ Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit diagram that permanently and positively identifies each terminal location specified hereon.
5/ The use of diodes on ac relays is optional. Actual application must be shown on label.
6/ Relay is magnetically latched in both positions. Caution note to observe polarity must appear on relays with dc
coils.
7/ Shock, vibration, and acceleration requirements application with coils de-energized.
8/ In the event of conflict between the text of this standard and the references cited herein, the text of this standard shall take precedence.
9/ Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation form a part of this standard to the extent specified herein.
10/ Pins to be perpendicular to header surface within 1 degree.
11/ Relay is magnetically latched in both positions. Caution note to observe polarity must appear on relays with dc coils.
12/ Shock, vibration, and acceleration requirements application with coils de-energized.
FIGURE 1. Design, dimensions, and circuit diagram - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business